Middle Voltage Triplex Service Drop Wire Multiplex Cable Black / Yellow / Red Color

    Production Description    

Definition:

It is a new overhead power cable. Widely used in overhead transmission line. It is mainly used for lighting, outdoor lighting, and temporary service. Phase voltage for 600 v or less, and the conductor temperature does not exceed 75 degree polyethylene insulated conductors and cross-linked polyethylene insulated 90 degree conductor (PE).

Feature:

 Good insulation properties.

 good corrosion resistance.
 against external damage and reduce the impact by trees, flying airborne objects, metal film and dust external factors, reducing phase short circuit and ground fault.

1 Type: Duplex , Triplex , Quadruplex Service Drop   
a Duplex Service Drop
Applications:To supply 120 volt aerial service for temporary service at construction sites,outdoor or street lighting . For service at 600 volts or lower at a conductor temperature of 75 maximum.
b Triplex Service Drop
Applications: To supply power from the ulility`s lines to the consumer`s weatherhead. For service at 600 volts or less(phase to phase ) at a conductor temperature of 75 maximum for PE insulation or 90 maximum for XLPE insulation .
c Quadruplex Service Drop
Applications: Used to supply 3 phase power , usually from a pole-mounted transformer to the use`s servic head where connection to the service entance cable is made . To be used at voltages of 600 volts or less phase to phase and at conductor temperature not to exceed 75 for PE insulated conductors or 90 for XLPE insulated conductors.

2  Construction   

a Phase Conductor construction:
The phase conductor is aluminum alloy 1350-H19 hard-drawn, compressed concentric-lay-stranded.
b Neutral Conductor Construction
Cable assemblies are available with the following neutral conductors:
Aluminum conductors, coated-steel reinforced (ACSR), concentric-lay-stranded
Aluminum alloy 1350-H19 hard-drawn, concentric-lay-stranded
Aluminum alloy 6201-T81, concentric-lay-stranded
c Insulation Material
The standard insulation on the phase conductor is black low-density crosslinked polyethylene (XLPE)
Alternatively, black linear low-density polyethylene (LLDPE) insulation with a 75°C temperature rating is available upon request.

3  specification    

Specification:

No. of cores x Cross sectional area (sqmm)

Packaging Material:

Steel wooden drum (fumigation)

Cable length in each drum: 500m/1000m or as per actual cable length requirements.

Drum size:

As per cable length and container size

 In order to quote you accurate price, kindly tell us your needed cable length quantity. Larger quantity, more discount benefit ready for you!